reboot-computer-feature-image

Your Home Network Maintenance

Many electronic hardware devices need some form of maintenance, from physical maintenance like cleaning cooling fans to electrical maintenance like rebooting. This article is about electrical maintenance of the electronic devices on your home computer network.

Reboot Your Computer

The way I like to think about electrical devices is that if they have memory, they will all eventually need rebooting. Take, for example, your computer. By continuously using your computer there will eventually be some form of memory corruption that will affect performance. There are programs to “clean” computer memory of such corruption, but you can always depend on a simple reboot to clean it up. After all, what is the first thing any computer support group ever tells you when you start having problems? “Try rebooting your computer.”

How often you may need to reboot your computer can vary from once a day to once a month or longer. I happen to reboot mine once a week or whenever unexplainable anomalies happen. Depending on your use you may want to reboot more or less often.

Modem/Router

Your network hardware, like your computer, also needs occasional rebooting to maintain performance. My network consists of a cable modem, a router, and a Voice-Over-IP (VOIP) box. The router and the other network devices need occasional rebooting to maintain performance. Ideally, you are updating your router firmware whenever you can be it manually or automatically, which generally requires a reboot after the update. Running the router without rebooting for months on end can result in a degradation of performance. Similarly, all your other network hardware should be rebooted occasionally.

An easy way to reboot a network is by plugging all the devices into one power strip. Even better would be plugging them all into a surge suppressor power strip to protect your hardware from electrical surges that can happen, for example, when there is an electrical spike. Either way, you will be able to reboot by simply turning off the power strip for about 30 seconds and then turning it back on.

Of course, rebooting the entire network should only be done when no one is using the network. That is why I have my network power strip plugged into a weekly timer set to turn OFF at 3 am every Wednesday and turn ON at 3:02 am every Wednesday. In other words, I automatically reboot my network once a week, very early every Wednesday when no one is using the network.

Weekly timers may be hard to find, but the one I use costs about $10, has an internal battery that maintains the time and settings through power outages and looks like this:
weekly-timer

Your feedback on this article is welcome. Please use the Comments section below to respond.

4 thoughts on “Your Home Network Maintenance”

  1. This is the worst computer advice I’ve read, ever! File corruption, data fragments, attached flash or hard drives, micro-voltage-connected parts, etc., etc., etc.! then there’s the possible power surge at power on, depending on how many devices are attached to the power strip (really?) — it only takes a few nanoseconds to be considered a power surge that will fry the tiny circuits. I am aware that there are built-in protections to prevent power-related damage to an electronic device, but POWER DOWN is much safer than any POWER OFF.

    1. Richard Pedersen

      Hi Plainolepop,

      (Sorry Stuart, but I had to jump in here because this comment is so off-base.)

      For starters, nothing was mentioned about putting your computer system on a timer to power-cycle it. The suggestion was to reboot the network devices. My router uses less than 10 watts and that could hardly cause a significant spike upon start-up. And the point becomes moot when your network devices are on their own power strip, which is what the article is telling you.

      And what’s the difference between powering down and powering off? I’ve never heard of such a distinction.

      Perhaps you should actually read the article before going on a critical rampage?

      Richard

  2. Thanks Richard,
    One more point: The title of the article is “Your Home Network Maintenance”. It has nothing to do with your computers EXCEPT that the network is not available to your computers for the two minutes that the network power is out. There is no damage to network devices when the power goes down and then is restored. It is instead helpful to do it occasionally.
    Stu

Leave a Reply to Stuart Berg Cancel Reply

Your email address will not be published. Required fields are marked *

Scroll to Top

WHY NOT SUBSCRIBE TO OUR NEWSLETTER?

Get great content like this delivered to your inbox!

It's free, convenient, and delivered right to your inbox! We do not spam and we will not share your address. Period!