Let’s Build a Retro PC – Part 1

 

pc6
Not just a beige box.

Retro is The New Black

Have you ever wondered what happens to all those beige boxes you remember from the 80’s and 90’s? Well some of them end up in flea markets, car boot sales and Ebay, if they haven’t already been crushed or thrown in some inner city canal along with all those supermarket trolleys. But many of them and their components, sit next to their modern rival offspring in dens, lofts, basements and studies from here to Chipping Norton.

The fact is, people love to restore things, whether they be cars, boats, fabulous oil paintings or computers. There’s something intrinsically rewarding on coming across a seemingly useless piece of junk and breathing new life into it, almost as if you were the very person it was waiting for all those years.

sprintunit
Wonderful SCSI.

Which brings me to when I recently took a trip back down memory lane with a customer who asked me to take a look at his Polaroid Sprint Scan 35+, which he brought over to me with a box of SCSI cards and cables, together with a very down and out looking PC, with which he had been working, but rather slowly.

nicepc1
Don’t come near me!

The end result of this exchange being a happier customer going home with a functioning 1997 model scanner and a replacement PC running Windows 98.

This brought forth an itch I needed to scratch and since it was still raining outside, what better time to dust off the old Pentium II? This particular beast has seen many incarnations, initially as a 486DX running Windows 3.1, until, over the years, the innards gradually became separated from the case, leaving it rather forlorn and empty looking in the corner of the garage, whilst real life wreaked its havoc outside.

Chips with everything

Sometimes I take old PC’s in part exchange and a while ago, I was able to acquire a Slot 1 motherboard to add to my collection of CDROM’s, old memory modules, floppy drives and other assorted paraphernalia squirrelled away in boxes under the sales counter.

bits
Where to start?

Breathing new life into the old Compace Rally (1992) was more of a pleasure than a chore and since the case still had its original AT 200W power supply (1992) and Panasonic (1995) CDROM, I at least had something to play with. I would have preferred an Asus or Soyo motherboard to the much maligned PC Chips M729 I had acquired, but it was certainly better than zero.

As I fitted the components together, it occurred to me how fantastically simple PC architecture really is. Much like Lego, things can only really mate up one way, if you discount the floppy drive of course, which even now appears to defeat logic, with its twisted cables and oh! so friendly power connector.

But to me, the machine would be of little use if I couldn’t play games, so I carefully dusted off my pair of Voodoo II PCI cards and mated them up with an ATI Rage Pro 4mb, sitting in the AGP slot with the pass through cable, for SLI gaming in its purest form.

3dfx
3dfx SLI

After some initial cussing with the PC Chips Taiwan website and being totally gobsmacked that they actually still existed, I managed to achieve a memory bank of 256 Mb, in carefully selected DIMMs. The next stage was a little tricky as I had to decide whether to flash the BIOS with some unknown Taiwanese ROM file, that would either allow the motherboard to see a hard drive larger than 8Gb, or simply kill it stone dead or just insert the Quantam Fireball 10Gb and let sleeping dogs lie. I chose the latter, being the Devil I already knew.

Although the motherboard was a tad scruffy, it did at least have headers for a PS2 mouse and two USB ports, which were luxuries I wasn’t really expecting. I passed on the modem header though, hoping I’d never have to use it and slotted in a 3Com PCI LAN card, a CM Audio ISA card and finally a PCMCIA ISA interface controller card for good measure.

Abort, retry, fail?

So, with the PC now fully loaded, it was time to really go back in time, boot to a floppy disk and listen to the chirping, whirring and unmistakeable grinding sound of a floppy in action.There are ways to boot to a Windows 98 install by snappier means, but if you’re a purist and you’re reading this, you’ll know why we don’t do that won’t you?

MSCDEX found the CDROM, which is always a relief, knowing that you’re not on a path to insanity and I was able to finally type in:D:\SETUP, watch the newly built computer come alive and become the machine it was designed to be.

By some curious miracle and remembering to copy the Win98 folder to the root of the drive, the motherboard drivers went through in a breeze, which left me with the more pleasurable task of installing the more important features, such as the 3dfx, ATI and sound drivers and setting the resolution to a more bearable tolerance level than the 4 bit brain burning horror fest that windows sometimes likes to throw at you.

PC7
Memory lane.

So, as I was just beginning to dust off those brain neurons and remind myself just how Windows 98 enjoys a torture session by throwing illegal operations at you, a veritable stampede of desperate customers broke out in the shop, forcing me to continue this nostalgia fest in PART TWO.

 

8 thoughts on “Let’s Build a Retro PC – Part 1”

  1. I always enjoy reading about old PC’s. Got one of those thing in my attic, might have to dust it off and run out the spiders and join you on this one. Might even have one of those bootable floppies laying around. Daniel.

  2. I started with a VIC-20 and went to some kind of Amstrand with a whopping 20Mb hard drive. I remember it cost me almost $4000.
    Then I built a 486DX and started the upward spiral.
    Woo Hoo !!!!!

    1. Forgot Compuserve on a dial-up at 33 cents a minute. All text, nuttin’ else.

  3. Installed Windows 98SE on my old my old retro gateway pc this afternoon. Install went OK until the Product Key. Typed in every key I could find but nothing worked. From their it was internet time and I found this “VP9VV-VJW7Q-MHY6W-JK47R-M2KGJ” it is supposed to work on all win 98 install disk, it worked for me. Right now I am using the machine to erase a bunch of floppy disk I have accumulated. Might use it to play my shop music on if I can find a media player. Daniel.

  4. Packrat! haha It’s good to read an article from someone whose ability to see the value in old junk exceeds my own! I still have a Leonite rocking a E2200 under the guise of “HTPC.” I also haven’t brought myself to throw out the 14.4K ISA modem one my adopted orphan PCs had in it back in the day…

  5. Marc did Windows 98SE ever have USB Mass Storage Device support or even USB 2.0 support? I can’t remember if I ever had USB 2.0 on my old Gateway Computer.

Comments are closed.

Scroll to Top

WHY NOT SUBSCRIBE TO OUR NEWSLETTER?

Get great content like this delivered to your inbox!

It's free, convenient, and delivered right to your inbox! We do not spam and we will not share your address. Period!