Defragmentation and Trim are both methods to optimize a drive; the former is used to optimize HDDs and the latter to optimize SSDs.
Windows includes a feature that automatically optimizes drives; the feature is enabled and set to weekly optimization by default. Windows identifies each drive type and applies the correct form of optimization process accordingly – defragmentation for HDDs and Trim for SSDs.
What Is Trim
There has been a lot written about how Trim works, much of which is quite technical. What follows then is a simplified explanation in layman’s terms.
Most of you will be aware that when you delete a file, it is not actually removed from the drive, but rather the space it occupied is marked as free to use. However, there is an important difference between the way in which HDDs and SSDs handle this situation.
SSDs cannot simply overwrite existing data in the way an HDD can. Instead, any invalid (unused) data needs to be erased. The Trim command tells the SSD what specific areas contain data that is no longer in use and can be removed. The next time the computer is idle, Active Garbage Collection will then delete that data.
What Is Garbage Collection
Garbage collection is a mechanism common to all SSDs that works in conjunction with Trim. Trim first identifies unused data, and Garbage Collection then clears out that unused data.
In order to clear unused data, any valid data within those blocks must first be written to a new block, and then both valid data (still in use) and invalid data (unused) can be cleared from the original blocks, thereby freeing up those blocks for rewrites.
If the drive were not to go through this process of moving valid data so that invalid data can be deleted and, instead, just keep writing new data to new blocks, the drive would eventually (and comparatively quickly) fill up with data.
How To Check Drive Optimization Status
Drive optimization plays an important role in maintaining an overall responsive system. To make sure automatic drive optimization is enabled on your system, open the Start menu and type defragment, then click on the top result:
—
