no signal

This forum requires Javascript to be enabled for posting content

Please consider registering
Guest

Search

— Forum Scope —






— Match —





— Forum Options —





Minimum search word length is 3 characters - maximum search word length is 84 characters

Register Lost password?
no signal
carbonterry2
Member
Forum Posts: 355
Member Since:
February 17, 2010
Offline
1
March 15, 2018 - 12:12 pm

Yesterday I woke up to both computer screens saying "No Signal". My graphics card is built it so I install an older card so I can see one of the screens. Windows won't boot. It gets halfway thru and the screen goes black. However, it will boot in safe mode.
Of course, I have everything backed up and I have a repair disc. I set the bios to boot from the DVD. The machine will NOT boot from the repair disk...period.... Every once in a while I get a blue screen asking me to choose my keyboard preference...sure...my keyboards both USB and wireless are disabled at this point. This is a dual boot system. I have run Mals and my Avast Pro anti-virus with no problems. Internet connection and sound are now disabled.

carbonterry2
Member
Forum Posts: 355
Member Since:
February 17, 2010
Offline
2
March 15, 2018 - 12:17 pm

I did attempt to run my MOBO installation software but received a message that the was a missing file and could not run.

dandl
Lexa, AR
Moderator
Forum Posts: 707
Member Since:
April 28, 2013
Offline
3
March 15, 2018 - 1:31 pm

All I can say at this point is to reformat and reinstall W10.

carbonterry2
Member
Forum Posts: 355
Member Since:
February 17, 2010
Offline
4
March 17, 2018 - 4:57 am

I removed the MOBO battery and re-installed. W10 will now boot after a prolonged wait. 100 secs
However, I cannot access the "Settings" menu or the advanced Start up menu.
I have tried to use the system image backup but when clicking on it I receive a message that it is not initialized.
My #2 HDMI monitor still has no contact with the machine.
I am hesitant to restart. The machine will still not boot from the recovery DVD.

Thanks

dandl
Lexa, AR
Moderator
Forum Posts: 707
Member Since:
April 28, 2013
Offline
5
March 17, 2018 - 9:37 am

If this is a dual boot, then what is the other OS and is it on a separate drive?

carbonterry2
Member
Forum Posts: 355
Member Since:
February 17, 2010
Offline
6
March 17, 2018 - 4:27 pm

W7 on another drive

dandl
Lexa, AR
Moderator
Forum Posts: 707
Member Since:
April 28, 2013
Offline
7
March 17, 2018 - 11:03 pm

Pull the plug on W10 and see if you can get W7 to boot.

carbonterry2
Member
Forum Posts: 355
Member Since:
February 17, 2010
Offline
8
March 18, 2018 - 7:13 am

I can boot into W7 at any time

dandl
Lexa, AR
Moderator
Forum Posts: 707
Member Since:
April 28, 2013
Offline
9
March 18, 2018 - 8:43 am

https://www.microsoft.com/en-us/software-download/windows10
If you can boot into W7, then I would download the latest W10 Media Creation Tool. You can either burn a DVD, or create a bootable USB or you can mount the ISO while in W7.
This tool should check for compatibility issues, which it sounds like you may be having.

carbonterry2
Member
Forum Posts: 355
Member Since:
February 17, 2010
Offline
10
March 18, 2018 - 2:58 pm

I could not get past adding the W10 key. Mine seems not to work.

dandl
Lexa, AR
Moderator
Forum Posts: 707
Member Since:
April 28, 2013
Offline
11
March 18, 2018 - 4:03 pm

If you have already installed W10 then your key should be already on a Microsoft server. It has been awhile since I have had to reinstall W10. If I remember their should be an option to not input the key. I usually go ahead and install W10 and after install I reboot and W10 will show as being activated. This would only apply if your previous W10 install was good.
You should still be able to install W10 and then use the change product key and then input your key.

carbonterry2
Member
Forum Posts: 355
Member Since:
February 17, 2010
Offline
12
March 18, 2018 - 9:07 pm

No option to enter at a later date. This is the W7 drive that I am using and I also have no internet connection for whatever reason. Machine is hardwired to ethernet with another machine (this one) that has connection.
Now, the option to boot from the W10 drive does not appear. It shows in the BIOS just does not appear after leaving the BIOS load screen.

carbonterry2
Member
Forum Posts: 355
Member Since:
February 17, 2010
Offline
13
March 18, 2018 - 9:08 pm

This W10 installation was an upgrade from MS.

carbonterry2
Member
Forum Posts: 355
Member Since:
February 17, 2010
Offline
14
March 18, 2018 - 10:13 pm

W10 has appeared again...will not boot except for Safe Moda

dandl
Lexa, AR
Moderator
Forum Posts: 707
Member Since:
April 28, 2013
Offline
15
March 19, 2018 - 12:13 am

Hit the windows key + R and type msconfig in the run box and uncheck safe boot under the boot tab and check normal boot under the general tab. Mine is set as selective boot.

Attachments
Forum Timezone: America/Indiana/Indianapolis

Most Users Ever Online: 2303

Currently Online:
28 Guest(s)

Currently Browsing this Page:
1 Guest(s)

Member Stats:

Guest Posters: 10

Members: 2532

Moderators: 7

Admins: 4

Forum Stats:

Groups: 8

Forums: 19

Topics: 1823

Posts: 13046

Administrators: Jim Hillier, Richard Pedersen, David Hartsock, Marc Thomas

Moderators: Carol Bratt, dandl, Jason Shuffield, Jim Canfield, Terry Hollett, Dick Evans, Sergey Grankin

Exit mobile version

WHY NOT SUBSCRIBE TO OUR NEWSLETTER?

Get great content like this delivered to your inbox!

It's free, convenient, and delivered right to your inbox! We do not spam and we will not share your address. Period!