One of the things she asked me was if I had a power adapter because her’s wasn’t working properly. I didn’t have one to offer her but, fortunately, I could use my own on her system. When I tried starting up the computer with her cord plugged in I couldn’t get the computer started up. I assumed the battery wasn’t charged and that’s when I decided to use my cord.
I plugged it in, started up the system and ran my usual cleaning ritual. Using Ccleaner to clean up the system. Using the Tools > Startup in Ccleaner to disable any unnecessary Startup options then running Malwarebytes and then Adwcleaner. Restarting the laptop if requested after each scan and then I then reset all browsers.
I ran Malwarebytes first and admit I did something stupid this time. I noticed the battery power was at 79% and it said the battery was not charging. I decided to unplug the computer to see what would happen, this was with Malwarebytes still running and the computer went off. So I had to plug it in again, restart the system and restart Malwarebytes. Again the battery power read 79% and not charging.
I assumed the battery had gone bad but, usually when this is the case, Windows picks up on it by displaying a message that the battery is bad and suggesting it be replaced. So while the scanners where running I went on-line on my own computer and did a little research on this issue. I came across some interesting info on Microsoft.com.
So following this article I went to the device manager and:
- disabled the Microsoft ACPI Compliant Control Method Battery and then
- shut down the system.
- Unplugged the power.
- Took out the battery.
- Plugged in the power turned on the computer.
- Went to the device manager and enabled the Microsoft ACPI Compliant Control Method Battery,
- shut down the computer again.
- Put in the battery, plugged it in and turned on the computer again.
It immediately started recharging again as normal!
Sometimes it seems the software that monitors the battery is actually what’s causing the issue.