This forum requires Javascript to be enabled for posting content
I have computer wish I bought this running Windows 7x64 bit can somebody please help me it will not boot into safe mode I hold down F8 and it loads all the drivers and then boots normally even if I shut down the computer on the power button, arrow down to safe mode it just boots normally I would appreciate any help on this problem.
Thanks in advance. P.S I cannot get into the bio's to check the boot order either 
It is an H.P P6-2020a with Windows 7 x64 bit I have tried hitting F8 and also hit esc to see what the Bios are set at but it just boots normally when I tap or hold the F8 key the drivers all load but it just boots normally it has got me buggard it was only bought in February this year.
You should be able to boot in Safe Mode via the Control Panel:
Go to Control Panel>Administration Tools>System Configuration>
Boot>Boot Menu and select Safe Mode. Restart computer and you
should find the reboot is in Safe Mode. Remember to change the
setting back to the original boot configuration.
Jim Hillier
Richard Pedersen
David Hartsock
Carol Bratt
dandl
Jason Shuffield
Jim Canfield
Terry Hollett
Stuart Berg
John Durso
1 Guest(s)